Geiger SLIM.TECline Spindle 35mm Mech Limits 10Nm, 17rpm
Mechanical limit switch
Fixed connection cable with open end
Fast setting of the end positions via precise spindle switch-off by means of inbus screws
Our proven SOC clip bearings, our roller bearings as well as the 12 mm square bearings are available. Due to the star-shaped design of the motor head, existing bearings can also be used. All common adaptors and driver sets of the SOLIDline series can be used.
Setting the end positions: You do not need a setting cable to set the end positions. The adjustment is made by turning the two independent adjusting screws for the upper and lower end position. As a tool you need a 4 mm Allen key or you use the supplied adjustment aid.
Also available in 6Nm, 26rpm version - call for price